PVC Counter Parallel Twin Screw Pelletizing Line Pvc Counter Parallel Twin Screw Pelletizing Line, Pelletizing Line For Pvc Counter Parallel Twin Screw,Pvc Counter Parallel Twin Screw Pelletizing Machine,Pvc Counter Parallel Twin Screw Extruder For Pelletizing ZHEJIANG IET ECO-TECHNOLOGIES CO.,LTD , https://www.ietmachinery.com
TDA1517ATW: 8 W BTL or 2 × 4 W SE power amplifier
The TDA1517ATW is an integrated class-AB output amplifier contained in a plasTIc heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for mulTImedia applicaTIons.
TDA1517ATW main features:
• Requires very few external components
• Flexibility in use: mono Bridge-TIed Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase
• High output power
• Low offset voltage at output (important for BTL)
• Fixed gain
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• AC and DC short-circuit safe to ground and VP
• Electrostatic discharge protection
• Thermal protection
• Reverse polarity safe
• Capable of handling high energy on outputs (VP ​​= 0 V)
• No switch-on/switch-off plop
• Low thermal resistance. 
figure 1. TDA1517ATW block diagram 
figure 2. TDA1517ATW BTL Application Block Diagram 
image 3. TDA1517ATW SE Application Block Diagram
The TDA1517ATW is NXP's 8W BTL or 2 × 4 W SE audio power amplifier with integrated Class AB output amplifier in the HTSSOP20 package for use as a mono bridged load (BTL) or stereo single-ended (SE) connection. Ripple suppression as well as AC and DC short circuit safety. This article describes the main features of TDA1517ATW, the block diagram and the BTL and SE connection application block diagram.