Many applications require remote control of the oscilloscope. For example, a computer connected to the network controls the oscilloscope on the network. If the control is complicated or requires automatic measurement and control, it is generally necessary to write special software. If you simply monitor the oscilloscope or remotely access files on the oscilloscope, you can take advantage of WINDOWS's remote desktop capabilities. The refresh rate of WINDOWS remote desktop is not high, the real-time feeling of display is slightly poor, and for security reasons, the password of the oscilloscope WINDOWS administrator account is generally not disclosed. So we recommend using the popular remote access software TeamViewer. First, the oscilloscope settings There are many versions of the TeamViewer software. The TeamViewer Host version can be installed on the oscilloscope After installation, the software guides to make basic settings, and sets the name and password of the remote control for the oscilloscope. This password needs to be used when controlling the remote control oscilloscope of the computer. You can not create an account. The following interface will appear on the oscilloscope WINDOWS, click the setting shown in the red box: Media Converter And Optical Fiber Switch Media Converter Optical Fiber Switch fiber optic switcher Media Converter,Optical Fiber Switch,Fiber Optic Switcher Chinasky Electronics Co., Ltd. , https://www.chinacctvproducts.com
In addition to the default options during installation, follow the example settings below (may vary depending on the teamviewer version upgrade): 
carry out. 