Stainless Steel Electromagnetic Flowmeter
Stainless Steel Electromagnetic Flowmeter means the whole electromagnetic flowmeter is made of stainless steel, including flange, the housing, and the measuring tube.
And ususlly stainless steel ellectromagnetic flowmeter need not spraying paint, and the apperance is eyeable stainless steel except polishing.
And the whole Stainless Steel Electromagnetic Flowmeter kooks good and has better corrosion resistance and more durable, of course the cost is a little higher than those electromagnetic flowmeter made of normal carbon steel material.
Stainless Steel Electromagnetic Flow Meter,Stainless Steel Flow Meter,Stainless Steel Electromagnetic Flowmeter,Intelligent Stainless Steel Magnetic Flow Meter Kaifeng Chuangxin Measurement & Control Instrument Co., Ltd. , https://www.kfcxflowmeter.com
Product Specifications:
Â
Model
Archon New Model WG96 Flashlight Rechargeable
 Bulb
SST-90 LED *1 (max 2200 Lumens)
 Color temperature
 6500 K (white light)
 Reflector
 8° hot spot,110° periphery
 Lens
 8mm Polycarbonate Board;
 Battery
 18650 rechargeable Li- ion battery *6;
 Battery Indicator
 100%-50%: Green; 50%-30%: Yellow; 30%-10%:
    Red; Below 10%: Red Flashing; Below 5%: switch off;
 Protection
Polarity reversing protection.Â
Gas release valve
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
Please put the switch sleeve on light head during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
Please charge the light every time after using. If it isn't used for a long time, please charge the light once every 3 months to prepare for next time using.
