Those of you who understand the production of solar panels must know that the connection process between solar film sheets is indispensable for the existence of conductive glue. At present, the conductive glue between the solar film panels of many companies is still using manual dispensing. This primitive operation is not only inefficient, but the product quality cannot be guaranteed, and the yield rate has always been high. Therefore, it is imperative to innovate this primitive production process. At present, Shanghai Gole Electromechanical has developed a A new type of desktop robot dispensing solution is available. Equipment components: 1. Small precision desktop dispenser. 2. High precision screw valve. 3. Microporous vacuum adsorber. Scheme operation mode: First, place the diaphragm on the microporous vacuum absorber seat, turn on the vacuum suction part to quickly vacuum, after the film is sucked, the dispenser runs to the corresponding intermediate position, the dispensing valve starts to dispense, and after the conductive glue is applied, the dispensing The valve is removed, the film is released by vacuum suction and deflation, and then the bonded film is taken out. Contact Information Mr. Zhong/Mr. Yang For more information, please refer to Uv Curing Hydroge Film,Uv Protective Curing Film,Flexible Uv Curing Film,Uv Hydrogel Curing Film Shenzhen TUOLI Electronic Technology Co., Ltd. , https://www.hydrogelprotectors.com
Dispensing solution for solar thin film conductive adhesive