Environmental issues that should be noted when installing DH-300 - Database & Sql Blog Articles

300-04043

Spot Remarks 2017+

AVX tantalum capacitor TAJB106K016RNJ stock

1. The ideal place to place is in an environment of 20 ° C / 68 ° F and humidity of 50%.

2. The installation position of the machine should avoid direct sunlight, vibration, wind, dust and magnetic field interference.

3. Confirm that the voltage used matches the voltage required by the model.

â—† Install the windshield and place the machine in the windshield.

â—†Level adjustment

Use the foot to adjust the level and adjust the bubble in the level to the center of the black circle to make the whole machine level.

â—†Sink installation

Distilled water was poured into the water tank to the top of the four frosted invisible lines on the water tank. After the surrounding water was wiped dry, the water tank was placed in two concave fixing grooves on the main machine.

â—†Measurement table installation

The measuring table is placed on the measuring plate, and the four projections of the measuring table are placed in the four concave fixing grooves of the measuring plate. At this point, please note that the hanging bar should be submerged in the water and that the hanging bar is not in contact with the sink.