With the advancement of technology, the changes of the lights are also very fast. From the halogen lamps used in the past to the current xenon lamps and more advanced LED lights, the development of the lamps is also a thousand miles. If you are not satisfied with the original car lights, it does not matter, many car owners in order to pursue brightness, safety, or just to make it more dazzling, to modify various lights. The lights are closely related to the safety of driving. If you just want to change the lights with a fun and cool attitude, you must not. Do not think that the lights can be changed at will, or the more expensive the more advanced the better, in fact, each car has its advantages and disadvantages, badly changed will only be counterproductive! Halogen lamp: Also known as tungsten halogen bulbs, quartz bulbs, is a variant of incandescent lamps. The principle is to inject halogen gas such as iodine or bromine into the bulb. At high temperature, the sublimated tungsten wire chemically reacts with the halogen, and the cooled tungsten re-solidifies on the tungsten wire to form a balanced cycle, avoiding the tungsten filament. Early break. Therefore, halogen lamps have a longer life than earlier incandescent lamps and are an improvement. However, with the continuous evolution of the lights, the shortcomings of halogen lamps began to appear. Halogen lamps have poor illumination at night or in bad weather conditions, such as rain and fog, and even greatly reduce the driver's field of vision. This is mainly reflected in insufficient brightness. Therefore, many car owners will seek other lighting systems, such as xenon lights, LED lights, etc., which are currently the most popular car light conversion options. Life expectancy: average 500 hours or more Energy consumption: general halogen headlights 55w Lighting effect: the light is even, but the brightness is relatively average, but the yellow headlight is very penetrating Dressing suggestion: If the original lamp is a halogen lamp, it is not necessary to change it to an LED lamp. Nowadays, many international brands have introduced white-light upgraded halogen bulbs. These products have greatly improved color, brightness and life compared with ordinary halogen lamps. And more importantly, the price is much lower than the price of xenon lamps and LED lamps, and it is relatively more economical to replace when damage occurs. In addition, halogen lamps have the best penetration among the three lamps, so it is recommended to use traditional halogen lamps for the high beam regardless of other lamps. Xenon lights Referred to as HID xenon lamp, it can be called metal halide lamp or xenon lamp. Its light-emitting principle is to raise the voltage to more than 23000V through the starter and electronic ballast to break the helium gas, which causes the helium to form an arc between the two electrodes. And shine. Therefore, if you look closely, you will find that there is no filament in the HID xenon lamp head, but the current generated between the electrodes is used to cause the collision of the helium molecules to produce brightness, and there is no problem that the tungsten wire is blown. The xenon lamp requires only 3.5A of current, and its brightness is three times that of a conventional halogen bulb. Its lifetime is 10 times longer than that of a conventional halogen bulb. Due to the high brightness, it is possible to provide a wider, brighter, longer distance illumination. Moreover, the xenon lamp will not be extinguished instantaneously, but will gradually darken until it is extinguished, so it will not suddenly extinguish when it encounters a lamp failure, which increases safety and wins emergency treatment time for the owner. However, Xenon lamps also have obvious shortcomings. The biggest disadvantage is that the penetration rate is low. When it encounters rain and fog, it is more disadvantageous; and it takes 2 to 3 seconds to reach the full bright spot. Therefore, it is generally not recommended to replace the high beam with a xenon lamp. However, there are exceptions. Some xenon lamps have a yellowish color temperature and are relatively transparent. The price of xenon lamps is also more expensive than halogen lamps. Life expectancy: up to 30,000 hours, which is 6 times the life of a typical halogen bulb Energy consumption: conventional xenon headlights 35w Lighting effect: relative light concentration, high brightness Dressing recommendations: Xenon lamps have high brightness and are relatively cheaper than LEDs. However, xenon lamps also have the disadvantage of not being able to reach the brightest at the moment, and the penetration is low. Therefore, the general recommendation is that the headlights can be converted into xenon lamps. LED light An LED lamp is a solid-state semiconductor device that converts electrical energy into visible light, which directly converts electricity into light. Significantly different from halogen lamps and xenon lamps, LED lamps are made up of a large number of small, high-density lamp pellets, so they can be easily designed into various shapes and look more beautiful. The LED lamp is currently the most energy-efficient, but it is a cold light, its ability to withstand high temperatures is slightly weaker, and the concentrating effect is slightly worse than that of xenon headlights. LED lights have the most advantages in terms of brightness, they are brighter than xenon lamps, and they can be turned on instantly. However, LED lights are lacking in illumination distance and have poor penetrability, so they are generally not used in headlights. However, this phenomenon has now been broken. Under the advancement of technology, the headlights of many models have adopted LED headlights. In addition, the operating temperature of LED lamps is very low, so there is a problem of heat dissipation - if the heat is not good, the life will be greatly shortened. Life expectancy: up to 100,000 hours Energy consumption: energy consumption is only 1/20 of halogen lamp Lighting effect: The spectrum is almost entirely concentrated in visible light, the luminosity is very high, and the brightness is highest in xenon lamps and halogen lamps. Dressing suggestions: The advantages of LED are obvious. It can reach the brightest, energy-saving and highest brightness in an instant, and there are many beautiful designs, which are the most beautiful and beautiful. But if you want to convert into LED lights, the first thing to consider is the cost. Due to the more advanced technology of LED lights, the maintenance cost is also high. Moreover, if many LED models are broken, it is necessary to replace the entire lamp assembly. The price is at least several thousand yuan.
The new product line is the characteristic product of our company's production and development, mainly including the Anti-corrosive Aluminum alloy spinning lamp pole,Solar Camera light,Cylindrical Intelligent Street Lamp,No power LED Module .
1.Aluminum alloy spinning lamp pole
The spinning pole is the use of foreign advanced spinning equipment,forming a whole without welding,forming a conical or profiled bar.And then polishing,remove surface oil,burr and indentation.Then after the quenching intensity,to T6 state,in line with international standards.The product never rust ,strong corrosion resistance,diversified surface treatment process,the appearance of simple fluid lines.Light weight and convenient installation and transportation,the rod body can be 100%recycling,low melting temperature.
Product features
â‘ Using spinning equipment advanced,the whole forming a non welding
â‘¡Product permanent does not rust,corrosion resistance
â‘¢Diversified surface treatment technology,make the appearance line succinct smooth
â‘£The light weight,convenient installation and transportation
⑤The rod body can be 100% recycling,melting temperature is low.
2.Camera street light
The camera street light is used to use the infrared network high definition intelligent ball's various features so that it can be widely used in the need of large-scale hd quality control of the site.
Functional properties
â‘ Smart Function:Smart Tracing,Smart Inspecting,Smart Road Monitor
â‘¡System Function:Smart Video,Smart Photo Enhancement
â‘¢Movement Function
â‘£Network Function
3.Intelligent Street Lamp
Intelligent Street Lamps are also called intelligent lighting or smart street lights.It adopts the Internet of things and cloud computing technology to comprehensively upgrade the urban public lighting management system, so as to realize centralized control, operation and maintenance information and intelligent lighting of street lamps.The most advanced versions of Intelligent Street Lamps have been designed to create a happy atmosphere in roads, streets, squares and other places.The design of intelligent street lamps can only be designed by a wide range of discussions and environments that provide an aesthetic consistency.
Product feature
1.Sensor
Monitoring urban environment conditions
Sensor norise
Air pollution sensor
Temperature/humidity sensor
Brightness sensor
Municipal construction monitor
2.RFID
Special crowed monitor
CMC monitor
Community security monitor
Municipal facilities monitor
3.Communication Services
Micro base station
Street lights embedded WIFI hot spot
4.Video Monitor
Security monitor
Vehicle monitor
5.Emergency Broadcast
Active of the external field radio monitoring center
6.Intelligent Lighting
Cellular cooling technology
Based on the luminance uniformity of light distribution
Intelligent single lamp/center controller
Variety of modular design lamp,holder is optional.
7.Information Release
Advertising exposure
Current politics news
Information release
8.Charging Column
Electric car
Electric bicycle
4. Led Module
â— Color temperature 3000-6000K
◠Light≥90LM/W
â— Matching the 2.3.4 lane,tunnel and Landscape Lamp,floodlight dedicated lens.Ensure that intensity and uniformity.
â— Glare index Signification reduce the original LED module size,removal of power supply problems.Low demands for application situation and installation personnel .More suitable for the transformation of traditional lamps.
Product features
â‘ The solid heat conduction,Plug-in package technology
â‘¡Alternating current method,Alternating current direct drive to overturn the traditional application.
â‘¢Avoid long-distance power.Transfer will have excess loss.
â‘£No power supply ACLED
⑤Customized LED lens
â‘¥Automatic dimming system intelligent.
⑦Wide application,flexible combination.
Aluminum Alloy Spinning Lighting Pole,Lightest Aluminum Alloy,Aluminum Alloy Torchlight,Lightweight Aluminum Alloy Jiangsu chengxu Electric Group Co., Ltd , https://www.satislighting.com
