Qualcomm, which does not have a production plant, rose to the top 10 in the semiconductor industry in the second quarter of this year. This is the first time that Fabless has entered the top 10.

Qualcomm is a US wireless semiconductor technology research and development company, ranking 13th in the last quarter and rising to the ninth place this quarter. More than Infineon, Qimonda, Freescale Semiconductor, NEC. Now juxtaposed with NXP Semiconductors and Hynix.
Although Qualcomm's recent judicial disputes continue, this did not affect the company's second quarter results. Its growth rate in the second quarter reached 8.6%, the highest among the top 10. And this was achieved in the global semiconductor industry's losses, while the global semiconductor industry's revenue fell by 3.6% to $63.1 billion.
For the first time, Qualcomm replaced Texas Instruments' position in the field of wireless semiconductor technology. This is the first time Texas Instruments has lost its throne.
Qualcomm's intellectual property rights will make it a huge profit in the transition to 3G. The International Trade Arbitration Association’s ban on US imports of Qualcomm’s chips will not have a significant impact on Qualcomm.
In stark contrast to Qualcomm's booming momentum is the general downturn in the Asian semiconductor market. Samsung, Toshiba, Hynix, Sony and NEC all experienced lower revenues in the second quarter, with Hynix's decline. The main reason for the decline is the decline in the price of DRAM. Hynix's decline reached 29.7%. Toshiba is the biggest company among the top 10, and it has declined in almost all areas except NAND.
As for the worst company or Japan's Sony, Sony even fell out of the top 10. Sony's involvement in all areas of consumer electronics has seen a significant decline. The company's revenue fell by 33.4%.
The best performers are Samsung and NEC. Like other companies, Samsung has experienced a significant decline in DRAM, but its growth in the NAND field has reduced the loss to the top of the NEC's ranking, which fell to the 11th place.


Aladdin lighting network hot spot recommended [Region] Huizhou Salon advocates energy-saving new life (Figure) [Market] Lighting companies to enter the lighting to OEM or M & A [forum] Change the mind - Italy simes lighting design appreciation (Photos) [Design] Dark night The elegant wall lamp design appreciation (Figure) [Expert] Thinking and exploration of night lighting distribution


1

DC Electronic Load

This series high power density programmable DC electronic load provides three voltage ranges 200V DC Electronic Load/600V DC Electronic Load /1200V DC Electronic Load. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity,which can make DC Electronic Load System in 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System . This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

Speical features as below:

● Flippable front panel and color touch screen allow convenient access and operation
● Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
● Adjustable current slew rate, adjustable CV loop speed
● Ultra high precision voltage & current measurement
● OCP/OPP testing function
● 50kHz high-speed CC/CR dynamic mode
● 500kHz high-speed voltage and current sampling rate
● Timing & discharging measurement for batteries
● Short circuit test mode
● Auto mode function provides an easy way to do complicated test
● Dynamic frequency sweep function for determining worst case voltage peaks*
● Non linear load mode function makes the simulated loading current more realistic*
● Supports external analog control function*
● V-monitor/I-monitor
● LED load simulation function
● Full protection: OCP, OPP, OTP, over voltage and reverse alarm
● Up to 20 units master/slave parallel control
● Front panel USB interface supports data import and export
● SCPI language and standard rack size make it ideal for ATE System integration
● Smart fan control with lower noise and better for environment
● Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions

DC electronic load,electronic load,DC load,ac electronic load, electronic load

APM Technologies Ltd , https://www.apmpowersupply.com