Cast Iron LV 3PH Asynchronous Motor Cast Iron Lv 3Ph Asynchronous Motor,Three Phase Asynchronous Cast Iron Motors,Cast Iron Motors,Cast Iron Electric Motor Yizheng Beide Material Co., Ltd. , https://www.beidevendor.com
Second, the rated current and rated voltage of the switch and socket should be consistent with the actual use of electricity. Do not overload arbitrarily, so as to avoid the short circuit caused by the overload of the bakelite.
Third, the knife-type switch should use a matching fuse. It is not allowed to change arbitrarily, especially thickening the melt, and it is not allowed to replace the fuse with a wire such as copper, aluminum or iron.
Fourth, the single-pole switch should control the fire (phase) line, not connected to the zero line. Otherwise, if the human body touches the stack, it will also cause an electric shock. Once the live wire is grounded, a short circuit can occur or even cause a fire.
5. The lamp socket is prone to accidents when it is overloaded. Therefore, high-power appliances such as electric irons, electric stoves, and air conditioners should not be connected to the lamp socket to avoid fire.
First, the correct selection, that is, according to the total capacity of the household appliances and the specific use of the environment, select the appropriate switch and socket. Fireproof switches and pull-wire switches should be used in places with high humidity; switches and sockets should not be installed in indoors with corrosive materials or dust, but should be installed outdoors; fire or explosion-proof switches should be used in places with burning or explosion hazards. And socket.