LEDs are optoelectronic devices that make pn junctions from compound materials. It has the electrical properties of a pn junction device: IV, CV, and optical: spectral response, luminescence, directional, time, and thermal properties. LED optical properties The light-emitting diode has two series of infrared (non-visible) and visible light. The former can use radiance, and the latter can measure its optical characteristics by photometry. Thermal characteristics The optical parameters of the LED have a great relationship with the pn junction temperature. Generally work in small current IF <10mA, or 10~20 mA continuous lighting for a long time LED temperature rise is not obvious. If the ambient temperature is high, the main wavelength or λp of the LED will drift to long wavelengths, and BO will also drop. Especially the temperature rise of the dot matrix and large display screen should be specially designed for the stability of the LED. The dominant wavelength of the LED can be expressed as λp(T')=λ0(T0)+ΔTg×0.1nm/°C with temperature. Mini PC
Are you tired on big and messy wires on traditional computer tower? If yes, mini pc bring clean and space saving working environment back to you. Whatever daily tasks, like browsing web pages, documents checking or making, online teaching or learning, entertainments, etc. Or heavy duty handling, like photshops, video or music editing, gaming, apps developing, engineering drawing, designing jobs, etc. You can always find a right pc mini intel at this store.
Mini PC Office is an most and popular series designed for those who mainly run WPS, photoshops, PR, email, entertainments, etc. Sometimes, also call it as mini pc officeworks or home assistant mini pc.
Mini Gaming PC comes with higher level processors, like intel i3, i5, i7 10th, 11th or 12th; bigger memory and storage, like 16GB or 32GB ram, 512gb up to 1tb. Of course, rich slots support linking with two or more monitors or devices.
Except mini pc windows 11, there are also All In One PC , Student Laptop, Gaming Laptop , Android Tablet, Yoga Laptop , etc.
Mini PC Windows 11,High Performance Mini PC,Mini PC DDR4,PC Mini Intel Henan Shuyi Electronics Co., Ltd. , https://www.shuyielectronictech.com
Luminous normal light intensity and its angular distribution Iθ
Luminous intensity (normal light intensity) is an important property for characterizing the luminescence of a light-emitting device. A large number of LED applications require cylindrical and spherical encapsulation. Due to the action of the convex lens, they have strong directivity: the light intensity in the normal direction is the largest, and the angle of intersection with the horizontal plane is 90°. When deviating from the normal θ angle, the light intensity also changes. The intensity of the illumination varies with the package shape and the intensity depends on the angular direction. The angular distribution Iθ of the luminous intensity is a measure of the intensity distribution of the LED illumination in all directions of the space. It depends mainly on the packaging process (including the addition of scattering agents in the stent, the pellet head, and the epoxy resin).
Luminescence peak wavelength and its spectral distribution
The LED luminous intensity or optical power output varies with wavelength, and is plotted as a distribution curve—the spectral distribution curve. When this curve is determined, the relevant colorimetric parameters of the device, such as the dominant wavelength and purity, are also determined.
The spectral distribution of the LED is related to the type and nature of the compound semiconductor used in the preparation, and the pn junction structure (epitaxial layer thickness, doping impurities), etc., regardless of the geometry and packaging of the device.
Regardless of the material made of LED, there is a strongest relative light intensity (maximum light output), corresponding to a wavelength, this wavelength is called the peak wavelength, expressed as λp. Only monochromatic light has a λp wavelength.
Line width
At ±Δλ on both sides of the peak of the LED line, there are two points whose light intensity is equal to half of the peak (maximum light intensity), which correspond to λp-△λ, respectively, and the width between λp+△λ is called the line width. Also known as half power width or half height width. The half-height width reflects the narrow line width, that is, the parameter of the monochromaticity of the LED, and the half width of the LED is less than 40 nm.
Main wavelength
Some LEDs are not only a single color, that is, there is not only one peak wavelength; there are even multiple peaks, not monochromatic light. The dominant wavelength is introduced for this purpose by describing the LED chromaticity characteristics. The dominant wavelength is what the human eye can observe, and the wavelength of the main monochromatic light emitted by the LED. The better the monochromaticity, the λp is also the dominant wavelength. For example, GaP material can emit multiple peak wavelengths, and there is only one dominant wavelength. It will work with the LED for a long time, the junction temperature will rise and the dominant wavelength will be biased toward long wavelength.
Luminous flux
Luminous flux F is the radiant energy that characterizes the total light output of the LED, which indicates the performance of the device. F is the sum of the energy of the LEDs emitting light in all directions, which is directly related to the operating current. As the current increases, the LED luminous flux increases. The luminous flux unit of visible light LED is lumens (lm).
The power radiated by the LED - the luminous flux is related to the chip material, the packaging process level and the size of the applied constant current source. At present, the luminous flux of a single-color LED is about 1 lm, and that of a white LED is 1.5 to 1.8 lm (small chip). For a power chip of 1 mm × 1 mm, a white LED is made, and its F=18 lm.
Luminous efficiency and visual sensitivity
1 LED efficiency has internal efficiency (efficiency of converting electrical energy into light energy near the pn junction) and external efficiency (efficiency radiated to the outside). The former is only used to analyze and evaluate the characteristics of the chip. The most important characteristic of LED optoelectronics is the ratio of the emitted light energy (amount of luminescence) to the input electrical energy, ie the luminous efficiency.
2 Visual acuity is the use of some parameters in illumination and photometry. The human visual sensitivity has a maximum value of 680 lm/w at λ = 555 nm. If the visual sensitivity is recorded as Kλ, the relationship between the luminous energy P and the visible light flux F is P=∫Pλdλ; F=∫KλPλdλ
3 Luminous efficiency - quantum efficiency η = number of emitted photons / number of pn junction carriers = (e / hcI) ∫ λP λdλ If the input energy is W = UI, then the luminous energy efficiency ηP = P / W if photon energy hc = Ev, then η≈ηP, then the total luminous flux F=(F/P)P=KηPW where K= F/P
4 Lumen efficiency: LED luminous flux F / external power consumption W = KηP It is evaluated with LED characteristics of the outer package. The high lumen efficiency of the LED means that the energy of radiating visible light is larger under the same applied current, so it is also called visible light luminous efficiency. High-quality LEDs require large amounts of light to be radiated outwards, and as much as possible, the external efficiency is high. In fact, the outward luminescence of the LED is only a part of the internal luminescence, and the total luminous efficiency should be η=ηiηcηe, where ηi is the p and n junctions with less sub-injection efficiency, and ηc is the sub- and multi-sub-composite efficiency in the barrier region. , ηe is the efficiency of external light extraction (light extraction efficiency).
Since the refractive index of the LED material is very high ηi ≈ 3.6. When the chip emits light in the crystal material and the air interface (no epoxy package), if it is incident perpendicularly, it is reflected by the air, and the reflectivity is (n1-1)2/(n1+1)2=0.32, which reflects 32%. In view of the considerable absorption of light by the crystal itself, the external light extraction efficiency is greatly reduced.
In order to further improve the external light extraction efficiency ηe, the following measures can be taken:
1 Covering the surface of the chip with a transparent material with a higher refractive index (epoxy resin n = 1.55 is not ideal);
2 processing the surface of the chip crystal into a hemisphere;
3 A compound semiconductor having a large Eg is used as a substrate to reduce light absorption in the crystal. Some people used n=2.4~2.6 low melting glass [component As-S(Se)-Br(I)] and made a large thermoplastic cap, which can improve the LED efficiency of infrared GaAs, GaAsP and GaAlAs by 4-6 times. .
Luminance
Brightness is another important parameter of LED luminescence performance and has strong directionality. The brightness of the positive normal direction is BO=IO/A, which specifies that the surface brightness of the illuminant in a certain direction is equal to the luminous flux radiated by the unit projection area on the surface of the illuminator in unit solid angle, and the unit is cd/m2 or Nit.
If the surface of the light source is an ideal diffuse surface, the brightness BO is constant regardless of the direction. The surface brightness of the clear blue sky and fluorescent lights is about 7000 Nit, and the brightness of the sun surface is about 14×108 Nit from the ground.
The brightness of the LED is related to the applied current density. The general LED, JO (current density) increase BO also increases approximately. In addition, the brightness is also related to the ambient temperature, the ambient temperature rises, ηc (composite efficiency) decreases, and BO decreases. When the ambient temperature is constant, the current increases enough to cause the pn junction temperature to rise. After the temperature rise, the brightness is saturated.
life
The brightness of the LED light appears to decrease in light intensity or brightness with long hours of operation. The degree of aging of the device is related to the size of the applied constant current source, which can be described as Bt=BO et/Ï„, Bt is the brightness after t time, and BO is the initial brightness.
The time t that is typically experienced when the brightness is reduced to Bt = 1/2 BO is called the lifetime of the diode. It takes a long time to measure t, and the life is usually calculated by calculation. Measurement method: the LED is connected to a constant current source. After igniting for 103 to 104 hours, BO, Bt=1000~10000 is measured successively, and Ï„ is obtained by substituting Bt=BO et/Ï„; then Bt=1/2BO is substituted. The life t can be found.
LED lifetime has long been considered to be 106 hours, which means that a single LED is at IF = 20 mA. With the development and application of power LEDs, foreign scholars believe that the percentage of light attenuation of LEDs is the basis of life. For example, the light attenuation of the LED is 35% and the lifetime is >6000h.
It can be seen from the formula that each time the junction temperature is increased by 10 ° C, the wavelength shifts to 1 nm for a long wave, and the uniformity and uniformity of light emission are deteriorated. This is a design that requires miniaturization and dense arrangement as a light source for illumination to increase the light intensity and brightness per unit area. In particular, attention should be paid to the use of a heat-dissipating lamp housing or special-purpose equipment to ensure long-term operation of the LED.