Panasonic E1W movement rear projection TV into the bus method to share - android - Phones Developers

MOS Power IC Full Range

Inductance Components

Brand AVX TPSE226M035R0125 - Low Impedance Tantalum Capacitor, AVX 22

Electronic Scale Crystal Oscillator 3.2*2.5mm 3225 16M (16.000MHz) 12PF 10PPM 20PPM 30PPM

SMD Aluminum Electrolytic Capacitor

One of the representative models of the Panasonic E1W movement rear projection color TV is the TC-47WG25G. This model features a CPU model MN1876476T4N, memory chip 24LC16BIPA24, and a small signal processor TA1215AN. To access the maintenance mode, follow these steps: While watching the TV normally, press the "Volume-" button on the remote control to reduce the volume level displayed on the screen to its minimum. Then, press the "Shutdown" button. The screen should display "30" or "60" or "90" in the lower right corner. Next, press both the "Status Call +" button on the remote and the "Volume-" button on the TV’s control panel for approximately 4 to 5 seconds. This will bring up the maintenance adjustment menu, specifically the IIC bus adjustment option labeled as Menu CHK1.

Once the necessary adjustments have been made, turn off the TV power and then restart it to exit the maintenance mode safely. This process allows technicians to fine-tune the internal settings without affecting normal operation. It's important to ensure all changes are properly saved before exiting the maintenance mode. Always double-check the settings after making any modifications to avoid unexpected performance issues.