Title: Surgical Inpatient Building Intelligent System Equipment (including LED) and Installation Procurement Notice Tender No.: FTCG2009014364 Announcement Date: March 30, 2009 Deadline: April 22, 2009 Tendering Agency: Futian District People's Hospital: Guangdong Province-Shenzhen Content: According to the "Shenzhen Special Economic Zone Government Procurement Regulations" and "Shenzhen Online Government Procurement Management Interim Measures", Shenzhen Futian District Government Procurement Center for Futian District People's Hospital Surgical Inpatient Building Intelligent System Equipment and Install the procurement project and use open tendering to welcome qualified suppliers to participate in the bidding.

1. Bidding Document No.: FTCG2009014364

2. Name of the bidding project: Intelligent system equipment and installation procurement of the surgical inpatient building of Futian District People's Hospital

3. Subject content: see user demand book

4. How to obtain the tender:

All registered Shenzhen online government procurement suppliers can log in to Shenzhen Futian District Government Procurement Website from March 27, 2009 to April 13, 2009 at 9:30 am in accordance with the granted operating authority. Ft.szzfcg.cn/Download the bidding documents for this project and respond to the bidding. If the bidder decides to participate in the bidding, he/she must first apply for bidding online in the Futian District Government of Shenzhen. The method is to log in to the Futian District Government Procurement Network in Shenzhen and click “Shengbiao Management→Bid Response” or “Acceptable Management→Confirm Invitation”; If you do not participate in the bidding after registering online, you should click “Reject” or “Cancel”. If you are not registered as a supplier of online government procurement in Shenzhen, please visit the Shenzhen Government Procurement Website, first apply for registration, and then apply for bidding. After registering online, click “Should be managed → download bidding documents” to download the bidding documents.

5. Bidder qualification requirements:

1) Bidders must be registered in the territory of the People's Republic of China and have independent legal personality.

2) Must be a government procurement supplier registered with the Shenzhen Municipal Government Procurement Center.

3) The registered capital of the bidder is more than 60 million yuan (including 60 million yuan);

4) Qualification level of design, construction and maintenance qualification certificate for safety technical protection system at the provincial or municipal level;

5) Have a special design certificate for building intelligence issued by the Ministry of Construction (Grade A);

6) Have the second-class or above qualification for construction intelligent specialization issued by the Ministry of Construction (including Level 2);

7) Computer Information System Integration Qualification Certificate issued by the State Secrecy Bureau involving state secrets (Grade A)

8) Having the qualification of computer information system integration issued by the Ministry of Information Industry;

9) Since January 2003 (subject to the time of signing the contract), the amount of a single contract for a similar project has been completed by not less than RMB 50 million (providing a winning bid or contract);

10) Proposing for major equipment manufacturers (BA equipment, program-controlled switches, servers, computer network equipment and desktop management software, integrated wiring system equipment, monitoring system equipment, card system equipment, office PC equipment, UPS, precision air conditioning) The original of the project bid authorization issued by the bidder and the original after-sales service commitment letter.

11) Original equipment manufacturer's authorization letter (with official seal of the manufacturer), original after-sales service commitment letter (with official seal of the manufacturer), product color page (integrated wiring, closed-circuit monitoring, program-controlled switch, office computer, server, LED display) and a copy of the certificate (with the official seal of the manufacturer), a copy of the bidder's qualification certificate (with the official seal of the bidder), and a copy of the project case contract (with the official seal of the bidder). The above documents and materials must be bound in a paper form in the form of a separate seal. The specific requirements can be found in the bidding documents.

Note: This project does not accept bidders in any form of union.

6. Q&A: If there is any doubt about the bidding documents before 18:00 on April 13, 2009 (including the tendency of the technical indicators or parameters of the bidding documents to be biased or unfair), please log in to “Futian District Government of Shenzhen” Purchasing Network", fill in the question in the "Standard Management - Bidding Q & A", and will not accept it after the deadline. Pre-standard Q&A meeting: It will be held at the first floor of Futian District Government Office Building (South Parking Lot) Futian District Government Procurement Center Bid Opening Room at 10:00 am on April 14, 2009 (next to the electronic evaluation room of Futian District Government Procurement Center) Hold the Q&A meeting before the bidding, and ask the bidders to send representatives to attend the meeting in time. The bidding party will announce the results of the Q&A in the “Standard Management → Bid Q&A” or notify the bidders.

7. E-bidding file upload:

All e-bidding documents should be uploaded to the Futian District Government Procurement Website in Shenzhen on April 22, 2009 at 9:30 am (Beijing time). The specific operation is to log in to “Shenzhen Futian District Government Procurement Network” and upload the bidding documents with the function of “Should be managed → upload bid documents”.

8. Submit the written part of the tender documents: All written documents should be submitted between 9:00 and 9:30 am on April 22, 2009 (overdue delivery or non-conforming part of the tender documents will not be accepted) Futian District Government Office Building 1st Floor (South Side Parking Lot) Futian District Government Procurement Center Electronic Bid Evaluation Office.

9. Submission of the bid sample (prototype): Each bidder shall submit the bid sample to the bid opening room on the first floor of the procurement center on the day of the bid opening, that is, from 9:00 am to 9:30 am on April 22, 2009 (Futian District Government Office Building) The south side of the parking lot on the 1st floor, opposite the Treasury Payment Management Center), the specific requirements of the bid sample (prototype) can be found in the annex to the bidding documents.

10. Time and place of bid opening:

Scheduled at 9:30 am (Beijing time) on April 22, 2009, in the electronic bid evaluation office of the Futian District Government Procurement Center in Shenzhen (the south side of the parking lot on the first floor of the Futian District Government Office Building, opposite the Treasury Payment Management Center) . Suppliers can log in to the “Futian District Government Procurement Network of Shenzhen” and use the “Symbol Management → Browse Bidding List” function to query the opening conditions.

11. Please note that the contents of the clarification documents, amendments or supplementary notice documents related to the bidding documents will only be announced on the “Futian District Government Procurement Network” after the bidding documents are issued until the deadline for submission of bids. The bidder is obliged to browse the Shenzhen Futian District Government Procurement Network from time to time during the bidding period. The information about the bidding project announced by the tenderee is deemed to have been delivered to the bidders. The tenderer will not call the bidders again.

12. For the purpose of this tender, you can inquire in writing and by telephone as follows:

Contact Unit: Shenzhen Futian District Government Procurement Center

(1) Consultation methods for related matters before the project is opened:

Address: Room 2904, 29th Floor, Office Building, Futian District, Shenzhen (Purchasing 1)

(2) Consultation methods for related matters after the project is opened:

Address: 1st Floor, Office Building, Futian District, Shenzhen, China (Evaluation) Standard Room (Purchasing 2) Company Name: Futian District Government Procurement Center, Shenzhen Contact: Tel: 0755-82917623 E-mail: Fax: 0755- 82918954 Zip: Address: Room 2904, 29th Floor, Office Building, Futian District, Shenzhen (Purchasing 1)

Portable Power Station

Jiangxi Huayang New Energy Co.,Ltd , https://www.huayangenergy.com