ON Semiconductor provides a variety of corresponding solutions for automotive applications such as in-vehicle networks, infotainment systems, and LED lighting to help car manufacturers meet the requirements of various standards.

1) Vehicle network solution

In terms of in-vehicle networks, its advantages lie in simplifying wiring harnesses and designs, reducing costs and vehicle weight; turning traditional power wiring harnesses into signal wiring harnesses to improve vehicle safety performance and reduce maintenance costs; More convenient after-sales; realize complex control functions, provide almost unlimited software upgrades; facilitate the formation of a unified open electrical platform, adapt to various vehicle models, various configuration changes, and shorten the development cycle. Therefore, at present, international car manufacturers are vigorously introducing CAN network technology. Studies have shown that after using the CAN network technology, the medium-term reduction of carbon dioxide emissions is expected to be about 2.6 g / km, and fuel economy is saved by 0.11 liters per 100 km. The evolution of vehicle network standards is shown in Figure 1.

image003.gif

Figure 1: Evolution of vehicle network standards

From low to high complexity, ON Semiconductor provides multiple solutions for different vehicle networks such as LIN, CAN, FlexRay, as shown in Figure 2.

image005.gif

Figure 2: ON Semiconductor's vehicle network solution

2) Infotainment system solution

ON Semiconductor's products used in power supplies for infotainment systems are mainly linear regulators for battery and post-regulation, as well as standard / low quiescent current, high power supply rejection ratio (PSRR) / ultra-low quiescent current, tracker and current Sensing; switching power supply (SMPS) for buck and boost controller / regulator, synchronous / asynchronous operation, high frequency / low quiescent current, battery and post-regulation; power management unit (PMU), with Higher integration and optimized size / performance. These products meet the requirements of next-generation size and energy efficiency.

The use of advanced power management technology can achieve low quiescent current (Iq) power management, sleep wake-up function and high energy efficiency energy saving methods. ON Semiconductor's Iq> 60 μA standard quiescent current LDO NCV42xx provides a second source beyond Infineon's TLE42xx devices; NCV85xx is feature-rich and can replace similar devices from Infineon / STMicroelectronics / National Semiconductor or exclusive supply Device. Very low quiescent current LDO NCV86xx (33 μA <Iq <50 μA) is pin-to-pin compatible with standard quiescent current devices; ultra-low quiescent current LDO NCV87xx (Iq <33 μA) is very low quiescent current device pin-to-pin Compatible, can achieve the purpose of energy saving.

Switching power supplies for infotainment system power supplies are available in two types, buck and boost. The former includes voltage regulator NCV8901 / 02 series, high-performance controller NCV8851 and low-cost controllers NCV3020, LV5749NV, etc. The latter includes boost controllers such as high-performance NCV8871 and low-cost NCV3063.

The power management unit NCV8855 has the following characteristics: switching power supply buck controller, 2 A switching power supply buck converter, 2 way LDO controller, 2 A high-side switch, its frequency is up to 600 kHz, providing 170 kHz, 340 kHz options, And ROSC or SYNC options. NCV8612 is a 3-way LDO output, with different voltage / current selection, automatic switching (ASO) function, ultra-low quiescent current (Iq) <50 μA can reduce power dissipation. NCV8881 uses 1.5 A switching power supply voltage regulator control converter, 8.5 V / 40 mA / 5.0 V / 100 mA LDO, with ROSC and SYNC and watchdog function, the frequency is up to 600 kHz.

ON Semiconductor's DSP tuner is a high-performance solution in line with current trends, suitable for high-end digital radios. Its unique continuous modulus algorithm (CMA) technology can greatly reduce multi-channel noise and reduce peripheral components (such as coils, diodes, ceramic filters) by 52. It supports HD broadcast interface, adopts LNA / MIX new design, corresponds to the global frequency band, and the dual-tuner adaptive array antenna (adapTIve-array-antenna, AAA for short) technology is mature.

ON Semiconductor also provides the RTIC (Real-TIme Traffic InformaTIon of China) program, which provides taxi-backed road condition information for the road information feedback system in 22 cities in China, which is then released.

ON Semiconductor's automotive infotainment system power supply solutions can meet both high performance requirements and low-cost solutions, covering most infotainment system power supply applications.

3) Automotive LED lighting solutions

LED lighting has the advantages of high light efficiency, low power consumption, long service life, strong safety and reliability, environmental protection and more energy saving. LED single tube power is 0.03-0.06 W, using DC drive, single tube driving voltage is 1.5-3.5 V, current 15-18 mA. It reflects fast, can operate at high frequency, and is used under the same lighting effect, the power consumption is one ten thousandth of incandescent lamps, and one half of fluorescent tubes.

Common automotive LED lighting driving solutions include resistors, linear current regulators (CCR), linear regulators, and switching regulators. The energy efficiency of these different schemes has been improved, but the complexity is also increasing. Among them, the resistance cost is the lowest, there is no electromagnetic interference problem, it depends on the voltage, the energy efficiency is the lowest, the maximum current of the LED can be simply limited, but the energy efficiency is also the lowest, and there are problems such as LED screening cost and thermal runaway. CCR performance is better than resistance, cost is lower than linear regulator, no electromagnetic interference problem, wide voltage range, high power density package, can protect LED, comply with AEC-Q101 certification, energy efficiency is low. The linear regulator's current stabilization accuracy is ± 2%. It uses multi-circuit, over-power self-regulation, no EMI problems, moderate cost, and low energy efficiency. Switching regulators have high energy efficiency, require special jacks, are relatively expensive, and can cause electromagnetic interference.

ON Semiconductor's automotive LED driver is very rich. Typical applications of linear regulators are central high-level parking lights, combined tail lights (turn signal lights, tail lights, brake lights), side turn signals, backlight; low-current LED (~ 20mA), low total power consumption, up to 85 ° C Ambient temperature and low system integration. Specific solutions include NSI45xxx (10mA-160mA / 45V) CCR, NUD4001 (500mA / 30V) LED driver and NUD4011 (70mA / 200V) LED driver. Typical applications for switching regulators are interior lighting, combined taillights (light guides), headlamps (first generation), and ambient lights; characterized by power LEDs (700 mA), medium to high total energy consumption, and up to 125 ° C Temperature and low system integration; specific programs are NCV3065 / 6 (1.5 A) constant current LED switching regulator and NCV8871 boost controller. Typical applications of lighting management integrated circuits (LMIC) are headlamps (high beam, low beam, daytime running lights, beacon lights, turn indicators, fog lights, static turn signals, side sign lights, etc.), Advanced headlamp system (AFS), combined tail lamp; its power LED is 700 mA, medium to high total power consumption, suitable for up to 125? C ambient temperature, is a complete subsystem; specific solutions are dedicated to automotive headlamp applications Highly integrated LED controller NCV78663 and linear stabilizer and controller NCV7680 for combined taillights.

Deluxe Rice Cooker

 

Deluxe Rice Cooker was one of electric type rice cooker  , but it`s the most popular type of electric rice cooker . especially famous in Southeast Asia area with its good appearances with various functions. Not only its outer shell could be customized with different demands, but also it speeding cooking  , saving times and electricity, enhancing our lifestyle

Features

The inner pot is made of solid and durable aluminum alloy of high intensity  , such as non-stick inner pot , stainless steel inner pot and honeycomb patterned inner pot with non-stick coating.

There are some models that use stainless steel instead of aluminium  .Various other materials, such as copper, pure carbon, ceramic, and diamond powder coating, may be used for higher heat conductivity or better taste.

 

Applications

Multifunction , can cooking rice, soup and much more. added cooking versatility with supplied steam tray.

Some rice cookers have settings for congee, a type of rice porridge called okayu in Japanese, Juk in Korea, and zhou in Chinese.

More elaborate recipes are possible using a rice cooker, and there are cookbooks devoted entirely to dishes prepared using a rice cooker. It is possible to cook soups, stews or sponge cakes in electric rice cookers. By simply adding ingredients and setting it to "warm", a rice cooker cooks the contents at about 65 Â°C (150 Â°F). In a few hours, the stew is fully cooked and ready to eat.

Deluxe Rice Cooker

Deluxe Rice Cooker,Cylinder Rice Cooker,Mini Rice Cooker,Stainless Steel Rice Cooker

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.kettles.pl