5KV To 46KV Medium Voltage Cable 5Kv To 46Kv Medium Voltage Cable,Underground Cable,Medium Voltage Cable,Insulated Armoured Copper Cable HENAN QIFAN ELECTRIC CO., LTD. , https://www.hnqifancable.com
When using the device, it is essential to first fill the water tank with water before turning on the power. Once the power is on, set the temperature selection switch to the "set" position and adjust the temperature knob accordingly. Monitor the digital display and set the desired temperature value with an accuracy of 0.1°C. If the set temperature is higher than the current water temperature, the heating indicator will light up, signaling that the heater has started working. At this point, switch the selection switch to the "measure" position, and the digital display will show the actual water temperature. When the water reaches the required temperature, the constant temperature indicator will turn on, while the heating indicator will turn off, indicating that the heater has stopped operating.
Due to the stationary nature of the water in the tank, there may be slight temperature differences between the upper and lower parts of the water. It is necessary to allow the system to stabilize and reach a consistent temperature before the constant temperature function takes full effect. This ensures accurate and stable performance during use. The design allows for precise temperature control, making it ideal for laboratory or industrial applications where accuracy is crucial. Always make sure the water level is sufficient before starting the heating process to avoid damage to the equipment.