Aluminum Alloy Conductor Steel Reinforced Aluminum Alloy Conductor Steel Reinforced,Aacsr Conductor,Aacsr Wire,Aacsr Cable HENAN QIFAN ELECTRIC CO., LTD. , https://www.hnqifancable.com
When using the device, it is essential to first fill the water tank with water before turning on the power. Once the power is on, set the temperature selection switch to the "set" position and adjust the temperature knob accordingly. Observe the digital display and set the desired temperature value (accurate to 0.1°C). When the set temperature exceeds the current water temperature, the heating indicator light will turn on, signaling that the heater has started working. At this point, switch the temperature selection switch to the "measure" position, and the digital display will show the actual water temperature. As the water reaches the desired temperature, the constant temperature indicator will light up, and the heating indicator will turn off, indicating that the heater has stopped operating.
Since the water in the tank remains still, there may be slight temperature differences between the upper and lower parts of the water. To ensure a stable and uniform temperature, the system will continue to heat until the temperature stabilizes. Once the constant temperature mode is achieved, the device will maintain the set temperature effectively. This process ensures accurate and consistent performance during use. Always make sure the water level is sufficient and never operate the device without water to avoid damage.