Why do lights need to be debugged?

Some people think that lighting design is to design lighting, as long as the design is completed, it is OK.

In fact, lighting debugging is an important step in the lighting design project service. How important is it?

Let's look at the picture below!

Nani!

Certainly someone said that Xiaobian is in a teasing, lighting design and this makeup female silver å•¥? Cough and cough! Quiet, quiet! Listen to me, the lighting debugging really has such a big difference, tune and not adjust, just like the pixel and makeup! Do not believe, look at the picture!

Many times, our lighting intention map is like this:

The pursuit of the effect of washing the wall light is like this:

But we often get some lighting effects that have not been professionally debugged, and it becomes like this:

So what can we do to debug the satisfaction of the owner?

1. First of all, we must clearly know what scenes are in the debugging space, what kind of lighting atmosphere the owner needs, and the scene table of the lighting should be done before debugging. On the basis of the scene table, adjust the brightness of each circuit according to the scene.

2. Before commissioning, communicate with the hotel's electromechanical construction and intelligent control equipment manufacturers to clarify each circuit of the design to ensure that the on-site circuit and the designed lighting circuit meet the requirements of commissioning.

3. When necessary, the lighting supplier shall also be assigned to the technician to assist in solving the relevant problems.

Then let's take a look at it, some comparison before and after debugging!

Before and after the high-altitude wall washer in the lobby bar:

Comparison of the decoration of the lobby decoration before and after the commissioning:

We are 10mm Blue Through-Hole LED(DIP LED)