The LED uses a solid-state semiconductor chip as a light-emitting material. The principle of light-emitting is that when a forward voltage is applied to both ends, carriers in the semiconductor recombine, releasing excess energy to cause photon emission to generate visible light, far-infrared light, and near-infrared light. .

LED is a new type of solid-state light source, and has shown excellent effects in special fields. Various types of LEDs, products using LEDs for secondary development, and products supporting LEDs are developing rapidly. New products are on the market and have been developed. Into a lot of new industries. Looking forward to the future, I also hope to improve even further.

The higher the operating temperature, the shorter the LED service life

In fact, the actual life of an LED is often inversely proportional to the operating temperature. For example, the LED lifetime is 10,000 hours at 74 ° C, 25,000 hours at 63 ° C, and 50,000 hours at less than 50 ° C. The root cause is that the photoelectric conversion efficiency of the LED is extremely poor. About 15 to 20% of the electrical energy is converted into light output, and the rest is converted into thermal energy. Therefore, when a large number of high-power LEDs are used in one module and applied to high-brightness operation, these extremely poor conversion efficiencies will cause a major problem in heat dissipation processing. However, the application of the thermal imager can assist in the research and development of the LED module drive circuit (including the power supply), the light source semiconductor heat distribution analysis, and the light decay test.

‧ View LED module driver circuit

In the development of LED products , engineers must carry out a part of the drive circuit design, such as rectifier circuit modules. With thermal imaging, engineers can quickly and easily find temperature anomalies on the circuit, making it easy to improve circuit design.


‧ Detection of LED light source semiconductor chip heating

Using the thermal imager, the engineer can obtain the infrared thermal image of the light source semiconductor chip, analyze the temperature of the chip during operation, and the temperature distribution. On this basis, the purpose of improving the life of the LED product can be achieved.


Thermal imaging cameras have been widely used in LED testing and quality control processes.

Deluxe Rice Cooker

 

Deluxe Rice Cooker was one of electric type rice cooker  , but it`s the most popular type of electric rice cooker . especially famous in Southeast Asia area with its good appearances with various functions. Not only its outer shell could be customized with different demands, but also it speeding cooking  , saving times and electricity, enhancing our lifestyle

Features

The inner pot is made of solid and durable aluminum alloy of high intensity  , such as non-stick inner pot , stainless steel inner pot and honeycomb patterned inner pot with non-stick coating.

There are some models that use stainless steel instead of aluminium  .Various other materials, such as copper, pure carbon, ceramic, and diamond powder coating, may be used for higher heat conductivity or better taste.

 

Applications

Multifunction , can cooking rice, soup and much more. added cooking versatility with supplied steam tray.

Some rice cookers have settings for congee, a type of rice porridge called okayu in Japanese, Juk in Korea, and zhou in Chinese.

More elaborate recipes are possible using a rice cooker, and there are cookbooks devoted entirely to dishes prepared using a rice cooker. It is possible to cook soups, stews or sponge cakes in electric rice cookers. By simply adding ingredients and setting it to "warm", a rice cooker cooks the contents at about 65 Â°C (150 Â°F). In a few hours, the stew is fully cooked and ready to eat.

Deluxe Rice Cooker

Deluxe Rice Cooker,Cylinder Rice Cooker,Mini Rice Cooker,Stainless Steel Rice Cooker

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectric.com